Post by BCNaples February 4, 2012 (1 of 4)
|
|
Hello Forum! I have a Sony STR-DA90ESG and a Sony DVP-NC685V (CD, DVD, SA-CD) player and have never utilized the SA-CD capabilities (shame on me, and I know what I have been missing!). Despite countless hours in the manuals and on the web I cannot find best practice/ best audio connection information for these two units. I recently bought a new BD player, so I intend to only use the NC685V for CD and SACD playback. The 685 has optical and coaxial digital outs and 5.1 channel (and 2-chanel stereo) analog out. The 90Es does not have 5.1 channel inputs.
Suggestions, advice and direction most appreciated getting these two singing together!
|
|
|
|
|
BCNaples said:
Hello Forum! I have a Sony STR-DA90ESG and a Sony DVP-NC685V (CD, DVD, SA-CD) player and have never utilized the SA-CD capabilities (shame on me, and I know what I have been missing!). Despite countless hours in the manuals and on the web I cannot find best practice/ best audio connection information for these two units. I recently bought a new BD player, so I intend to only use the NC685V for CD and SACD playback. The 685 has optical and coaxial digital outs and 5.1 channel (and 2-chanel stereo) analog out. The 90Es does not have 5.1 channel inputs.
Suggestions, advice and direction most appreciated getting these two singing together!
see your other post in another thread.
|
|
|
|
|
Because your receiver does not have 5.1 analog in your pretty much stuck with 2 channel unless you upgrade your receiver.
|
|
|
|
|
QUOTED from other thread:
There is only one obvious solution for you: Use the analog stereo output of either player and an analog stereo input on the AVR. Unfortunately, your AVR seems to re-digitize all analog inputs and at 48kHz. As a result, you may not be able to enjoy any of the advantages of SACD with that setup.
Kal
|
|